Bottom Brackets / Cranksets

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BB30 for SRAM DUB Road comes in two versions; one using our CeramicSpeed Standard Bearings and the other using our Coated Bearings for even longer lifetime and lower friction. Compatible with: - Frame: BB30 - Opening diameter: 42mm - Shell width: 68mm - Bottom Bracket Tool for installation: BBT-79 In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BSA for SRAM DUB Road comes in two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BSA - Opening diameter: Threaded - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacertube

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The ITA for SRAM DUB Road comes in two bearing options. The first option is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second option is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: Italian BB - Opening diameter: Threaded - Shell width: 70mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet - Spacer tube

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The PF30 for SRAM DUB Road comes in two versions. One version uses our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: PF30 - Opening diameter: 46mm - Shell width: 68mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

- Cinch Direct Mount Technology for 1x - Direct power transfer from stiff carbon fibre construction - Built for Road, CX, Gravel, Tri, TT - Chainline: 1x = 47mm, 2x = 45mm - Weight: 442g (40t, 1x), 590g (2x) - Q-Factor: 149mm - Bottom bracket/spider sold seperately - For 2x configurations, removeable spider required.

The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately

Built off the proven Next R crank arm shape and spindle insert, the Next SL stands to be lighter, with major improvements in durability and carbon consistency. Made in Canada with American-sourced carbon, the Next SL is also stiffer, improving power transfer and giving you the competitive edge on your pedal-oriented cross country rig. - Increased stiffness and strength improves power transfer - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Includes 30mm CINCH spindle, and is power meter compatible - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - Weight: 418 - BB Included: No

Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 162mm Q-Factor

Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor

- Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 Spindle - Cinch technology for game-changing compatibility

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Cinch technology for game-changing compatibility - Includes 30mm spindle, for 68/73mm BB shells

Pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. The Next R CINCH Crankset is light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - CINCH technology offers game-changing compatibility - Includes 30mm CINCH spindle - Direct mount chainline: 52mm / 58.5mm (Flipped Ring) - 2X Cinch spider chainline: 50.5mm - Boost 2X Cinch spider chainline: 53.5mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 141/148 Boost Hubs, 135/142 MTB Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace/Easton CINCH - Chainring BCD: Direct Mount CINCH - BB Included: No

SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems

The RX Crankset is our latest step into the Gravel and Road world, following our successful RX4 calipers and RS4 hubs. A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight. All are proudly designed, manufactured, and tested in Barnoldswick, UK to the same standards as our MTB cranks, for confident use on or off-road. - A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight - Tested to the same standards as our MTB cranks for confidence on or off-road - Featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Fully CNC machined 7050 Aluminum for precise material removal - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 518g (172.5mm and 5 bolt spider, w/o BB)

The SRAM RED AXS Crank Arm Assembly features hollow carbon Exogram crank arms for a lightweight, strong, and elegant crank. It can be paired with any SRAM AXS spider or integrated chainring, with or without power. - The 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Hollow Exogram carbon arms - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road, Tri, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No

Pairing the versatile GXP bottom bracket platform with hollow carbon Exogram arms, the SRAM RED crankarm assembly is light, strong, and elegant. It can be paired with any SRAM AXS spider or integrated chainring, with or without power meter. - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings - Hollow Exogram carbon arms - BB/Spider/Chainrings not included

True competitors are always looking for a performance advantage — a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. Specifications: - CRANK ARM LENGTH: 165mm, 170mm, 175mm - BB SPINDLE INTERFACE: DUB - BB COMPATIBILITY: All SRAM MTB WIDE DUB BBs, DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - SPEEDS: 12 - CHAINRING MATERIAL: No rings - BOLT CIRCLE DIAMETER (BCD): Direct Mount (DM) - CHAINLINE: 55.0mm, n/a - CHAINRING SIZE: No rings

True competitors are always looking for a performance advantage - a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. - Chainrings not included

The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686

e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

The FSA SL-K carbon tandem cranks feature an asymmetrical modular compact 2 x 11-speed spider, 30mm spindle, and tons of adjustability. - Hollow carbon arms with UD carbon finish - Asymmetrical 110 A.B.S BCD achieves 4 chainlines (44,47,50,53) - English BB included - 104 BCD timing spider - 653 grams - Number of Chainrings: Single - Crank Intended Use: Tandem - Pedal Spindle: 9/16" - Rings: 38 - Spindle Interface Type: 392 EVO - BB Included: English

The BB30 standard opened up design possibilities for frames. Adapting it for Shimano cranks takes a special machined aluminum threaded bottom bracket that threads into itself. Ours are finished with CeramicSpeed Bearings. You have two choices in terms of bearings. The first choice is our low drag, long life standard bearing with hardened-steel races and our super-round CeramicSpeed Balls. The second choice is our coated bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. This bottom bracket works with cranks that have 24mm spindles. Bottom brackets have several variables, but within that, CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings see another big bump in performance. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. Performance can be tuned by changing the grease. All Round Grease comes installed, but can be changed for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in the bearing when riding through messy conditions. In The Box: - 1 bottom bracket with bearings installed - 2 dust covers installed - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

Shimano cranks fit into BB86 frames when you have this CeramicSpeed Bottom Bracket installed. The kit consists of two cups that are pressed into either side of the central opening. The cups come with CeramicSpeed Bearings installed. There are two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed Balls. The second version is our coated bearing, which uses those same CeramicSpeed Balls installed on coated, hardened-steel races for longer life and less bearing drag. This CeramicSpeed BB86 Bottom Bracket works with cranks that have 24mm spindles, including both Shimano and FSA. CeramicSpeed standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That represents an average 75% drag reduction compared to standard bottom brackets. The hardened-steel races feature the CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. The CeramicSpeed Bearings last at least three times longer than other bearings. Coated Bearings drop friction further and increase lifespan. The coated races see a 50% drag reduction and an improvement in bearing life of 60%. In The Box: - 2 bottom bracket cups with bearings installed - 2 dust covers with integrated spacers installed - Spacer tube - 10ml syringe of All Round Grease - Sticker sheet

BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, found on cranks from Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. 24mm spindles easily fit through the shell and allow for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet

This bottom bracket is perfect for when you have a PF30, BBright, or 386EVO shell frame and want to install a crank with a 30mm spindle into the frame. All these frame standards have a 46mm inner diameter and smooth insides, though the widths vary from 68mm to 86mm. This bottom bracket features nearly zero loss of power due to friction, thanks to the CeramicSpeed's incredibly efficient bearings. Choose either our Standard or Coated Bearings—both have super-round, super-smooth CeramicSpeed balls rolling on hardened-steel races. The Coated version has a metallic coating laid onto the races, making them even harder and smoother and resulting in longer life and lower drag. They come installed in cups. 30mm spindles on cranks are increasingly popular because of the high stiffness and low weight. 46mm inner diameter bottom brackets are popular for the freedom they offer designers in building frames. Because of the variety of widths, the cups here extend into the shell and come with a telescoping spacer tube to further seal and stiffen the system. The bottom bracket is already stiff thanks to hard ceramic bearings and hardened-steel races. Thanks to CeramicSpeed, it also generates nearly zero drag. Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction versus conventional BBs. The bearings also last at least 3x longer than other bearings. You can change the grease to fine-tune your BB's performance characteristics. TT and Track, All Round, and LongLife are greases CeramicSpeed designed. The first has the least drag, while the last is the most durable. All Round, in the middle, comes standard in road bearings. In The Box - 2 cups with bearings installed - 2 1mm spacers - 2 0.5mm spacers - 2 dust covers - O-ring - Spacer tube - 10ml All Round Grease - Sticker sheet

The X01 DH crankset with X-SYNC technology is engineered for ultimate DH performance in the most aggressive terrain. The carbon crank combines stiffness and strength with lightest-in-class weight of under 800 grams. Proven in World Cup and World Championship racing, it's the crankset made for relentless downhill rides. - Carbon DH racing crank - CNC-machined, 7075, two-tone anodized X-SYNC chainring, 94 BCD - X-SYNC technology compatible with SRAM 1x7 and 1x10-speed DH drivetrains - X-SYNC tall, square tooth design provides maximum chain control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Lightest in class carbon construction - High strength alloy pedal lug

The new X01 Eagle is our best, toughest, and most aggressive Trail and Enduro crankset thanks to DUB technology. The reengineered design, employing our proprietary CARBON TUNED lay-up technology, is built tough to handle aggressive lines through rock gardens and big hits wherever you find them. - DUB technology delivers the strongest, stiffest, lightest crankset available - All-new SRAM CARBON TUNED crank technology provides extreme stiffness and low weight - All-new chainring technology is designed specifically for Eagle chains and drivetrains - The X-SYNC2 chainring provides significantly quieter performance, with better mud clearing and extraordinary durability

- The strongest crank in the entire Eagle ecosystem - Raw aluminum finish on the X-SYNC 2 chainring teeth – to keep looking fresh throughout its long lifespan.

Strength is how the X01 Eagle DUB crankset takes capability to places never before reached. It’s the strongest crank in the entire Eagle ecosystem, and it holds this status at a weight that is hard to fathom. It features industry-proven and rider-beloved DUB technology to radically simplify the relationship of spindle to bottom bracket, delivering unprecedented simplicity, compatibility, and durability. - The strongest crank in the entire Eagle ecosystem. - Master X01 colorway as part of Eagle Colorsystem—goes with all cassette and chain color options.

The new X01 Eagle is our best, toughest, and most aggressive Trail and Enduro crankset thanks to DUB technology. The reengineered design, employing our proprietary CARBON TUNED lay-up technology, is built tough to handle aggressive lines through rock gardens and big hits wherever you find them. - DUB technology delivers the strongest, stiffest, lightest crankset available - All-new SRAM CARBON TUNED crank technology provides extreme stiffness and low weight - All-new chainring technology is designed specifically for Eagle chains and drivetrains - The X-SYNC2 chainring provides significantly quieter performance with better mud clearing and extraordinary durability

Strength is how the X01 Eagle DUB crankset takes capability to places never before reached. It's the strongest crank in the entire Eagle ecosystem, and it holds this status at a weight that is hard to fathom. It features industry-proven and rider-beloved DUB technology to radically simplify the relationship of spindle to bottom bracket, delivering unprecedented simplicity, compatibility, and durability. The X01 Eagle DUB Crankset also comes with our Eagle Colorsystem, in the X01 master colorway—to go perfectly with all other available cassette and chain colors from Black to Gold to Rainbow, and now Copper. All this with a raw aluminum finish on the X-SYNC 2 chainring teeth to keep looking fresh throughout its long lifespan. - The strongest crank in the entire Eagle ecosystem - Master X01 colorway as part of Eagle Colorsystem—goes with all cassette and chain color options - Available in the X01 master colorway and Oxy Red X01 signature colorway - Raw aluminum chainring teeth keep the crank looking fresh throughout the entire lifespan of the precision CNC-machined direct mount ring

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with the widest gravel tires

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - BB not included

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1" tire widths (43/30T chainrings only) - BB not included

The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed Bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. You have two bearing choices. The first choice is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BB86 - Opening diameter: 41mm - Shell width: 86.5mm In the box: - 2 CeramicSpeed Bearings - 2x dust covers - Plast-sheet - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker Sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The BBright for SRAM DUB Road comes in two versions. The first is our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: BBright - Opening diameter: 46mm - Shell width: 79mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

The new SRAM DUB crank standard, built on a 28.99mm spindle, allows for a more contamination-resistant BB design while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for. With an integrated dust cover for all models, the snug & secure fit not only fully protects the face of the bearing, but also delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with unparalleled durability & efficiency. The SRAM DUB crank spindle requires the bearing contact points to be in a set and designated width, and all CeramicSpeed bottom Bracket options perfectly match the bearing placement on the crank spindle with the required frame interface for nearly any model of bike. Without the use of unnecessary adapters or spacers, a quiet & stable platform is ensured throughout the life of the product. The EVO386 for SRAM DUB Road comes in two versions. The first version uses our low drag, long life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The second version uses our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. Compatible with: - Frame: EVO386 - Opening diameter: 46mm - Shell width: 86.5mm In the box: - 2 cups with CeramicSpeed Bearings installed - 2 dust covers - Spacer-tube - 4 x 1mm spacers - 2 x 3mm spacers - 10ml syringe of CeramicSpeed All Round Grease - Sticker sheet

The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings you can use to replace bearings in PF30 cups. You have two bearing choices. The first choice is our low drag, long life Standard Bearing, with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. BB30 was designed to make the bike lighter: no cups, threading, or redundant metal, plus a lighter, stiffer crank. That's why the crank spindle is 30mm, which was a big jump up from square-taper spindles. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings. In The Box - 2x bearings - 2x 1mm spacers - 2x 0.5mm spacers - 2x dust covers - O-ring - 10ml syringe of grease - Sticker sheet

The STYLO Carbon Fat Bike DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fat bike frame compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 190/197 Hubs

Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology. - Single-ring drivetrain simplifies functionality - SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control - Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults - Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability - Weight 679g-24mm, 172.5mm, 50T, no BB - Bottom bracket not included

SRAM's Force 22 Crankset uses unidirectional carbon arms with a forged aluminum spider and integrated bottom-bracket axle to ensure top-notch stiffness for awesome power transfer and exceptionally low weights. Experience phenomenal front shifting with SRAM's X Glide R chainrings that start out as 5mm-thick aluminum plates and then precision machined to eliminate all unessential material while retaining extreme stiffness. With so much great technology and 11-speed compatibility, they're a force to be reckoned with.

The X0 Eagle T-Type AXS™ Wide left crankarm with Power Meter spindle provides riders with accurate, live power data delivery housed in our most advanced aluminum crankset. The power meter technology is integrated through what SRAM calls “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS™ enabled components. No-compromise, no-fuss data delivery with robustness in mind. - Innovative "DUB-PWR" design allows for lightweight, subtle Quarq power integration - Compatible with RockShox Flight Attendant - Unique, groundbreaking design integrated with one of the lightest aluminum cranksets on the market - +/-3% accuracy means you'll always know your true watts output - Long battery life provides 400+ hours of usage - Waterproof (IPX7 waterproof to 1 meter for 30 minutes - Right arm, Bottom bracket, Chainring and Spider NOT included

Continued development of our popular crankset has led to the EVO Edition, a benchmark for aluminum MTB cranks. The latest FEA analysis tools, rigorous lab testing, and extensive field testing mean the EVO crankset is both lighter and stiffer than the previous model. Now featuring a self-extracting axle/arm interface, simplifying fitting and removal. And all proudly designed, tested, and manufactured in Barnoldswick, UK. - 15% lighter and stiffer than the previous model - Now featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Forged and CNC machined 7075 series aluminum alloy crank arms - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 641g (arms, axle, and 34 tooth spiderless ring)

An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

The most advanced aluminum crankset SRAM has ever made, the X0 Eagle T-Type Wide crankset is utterly unique and simply striking. Bringing serious riders the exact sort of legitimate performance X0 stands for, courtesy of a ground-breaking all-aluminum design with a perfectly balanced stiffness to weight ratio. - Unique, ground-breaking design and one of the lightest aluminum cranksets on the market - All-aluminum design provides perfect stiffness to weight ratio - Includes X0 T-Type removable and replaceable 2-Guard aluminum bashguard to protect your chainring when riding rough terrain - 55mm Chainline - 174mm Q-factor - DUB bottom bracket and spacers NOT included

The Hellbender 110 Bottom Bracket provides an incredible mix of performance and longevity through the inclusion of Enduro XD-15 ceramic bearings. These bearings feature nitrogen infused stainless steel races that will not rust or corrode paired with Silicon Nitride ceramic balls. - Enduro XD-15 ceramic ball bearings are made from pure silicon nitride material with extreme high density and uniform compaction - The race material is an advanced stainless alloy that is nitrogen infused and will not rust or corrode - Dual stage anodize black and gold machined aluminum bottom bracket cups - Kluber NBU52 grease runs better and smoother with time and is highly resistant to being washed out - Designed for use with 30mm spindles

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ZERØ Ceramic Hybrid - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 106g

The SRAM carbon GX Eagle crankset delivers consistent performance every time out. Featuring SRAM's X-SYNC 2 tooth profile chainring, the Carbon GX crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination, and forward and backward compatibility. Now everyone can benefit from a new measure of durability.

The STYLO Carbon Fat Bike DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fat bike frame compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 170/177 Hubs

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

The svelte strength of carbon fiber with the swagger of heavy metal. The Descendant Carbon DUB crankset uses a proprietary TruVativ carbon construction process, delivering a crankset light enough for XC, yet durable enough for Enduro. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon construction for lightweight durability - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs

The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs

The STYLO Carbon DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the new STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fully compatible with any 1x drivetrain - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 135/142 MTB Hubs

- Ceramic bottom bracket for DUB spindle cranks Specs: - BB Shell Type: PF30 - BB Shell Width: 68/73mm - BB Bearing: Ceramic - Crank Spindle Diameter: 28.99mm - Interface: DUB - Cup Diameter: 46mm

The game-changing DUB family goes ceramic. While DUB has been simplifying the game, eliminating compatibility frustration and confusion for years, the DUB ceramic bottom bracket gives riders an additional option for even more silky-smooth performance. This is a whole other level in bottom bracket friction reduction, thanks to its high efficiency, ceramic bearings. What's more, the DUB ceramic bottom bracket can help riders save precious rotational energy without sacrificing the kind of robust seals required for real MTB and road racing scenarios - High-efficiency ceramic bearings save riders rotational energy - Silky smooth, without sacrificing robust seals required for real-life durability MTB and racing scenarios - One oversized spindle to work across every bottom bracket standard - PressFit 30 (68-73mm) Road Wide Specifications: - Spindle Interface Type: SRAM DUB - Bottom Bracket Shell I.D.: 46 - BB Shell Width (mm): 68 - Defined Color: Black - BB/Frame Interface: PF30 - Weight: 120

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

The XX Eagle E-MTB Crank takes from its race-winning lineage and is optimized for E-MTB use. Carbon fiber engineered with a foam core to give both incredible strength and maximized stiffness under the high torque environment of E-MTB. Paired with the new XX Eagle Transmission (T-Type) direct mount chainring, performance and design aesthetic blend together to provide our most premium, performance driven crank arm. - Carbon with foam core provides light weight with maximized stiffness