Tools and Maintenance

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.

Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too. - Optimizes performance and efficiency of bottom brackets, hubs and headset bearings - Use on stems, seat posts, cables and any threaded assemblies - Prevents rusting even when exposed to salt water - Clear and non-staining

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. There is a special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - With holding function (HF) securely holds the hexagon socket screw on the tool

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.

World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.

SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

The Muc-Off All-Weather Chain Lube is a high-performance synthetic lubricant. The unique water repellent, non-fling formula penetrates deep into the chain link, to create a durable protective coating which guards against corrosion metal-to-metal wear. A unique blend of extreme pressure additives ensures the lube can stand up to even the toughest of rides. Muc-Off's formula provides lubrication for long-distance, on & off-road riding in all conditions. - Ideal for MTB, Road, Cyclocross and Commuting - Suitable for use in all weather conditions - Added protection against contaminants - Provides smooth and quiet gear shifting - Reduces friction and improves efficiency - Derived from renewable sources - Can be applied to chain, cables, shifters, derailleurs, pedals & cleats - Pipette system for easy application - Readily Biodegradable* - Integral UV tracer dye - aids accurate application to ensure total protection. *Only contents are readily biodegradable.

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

- Ultra durable, long distance chain lubricant - Excel in long distance wet or muddy conditions - It penetrates deep into the chain links core to provide long lasting lubrication and total protection - Extreme pressure additives coat every part of the link to provide silky smooth gear change and ultra efficient drivetrain

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.

Park Tool is world-renowned for their bicycle industry tools, and their pumps are no exception. Keep yours up to speed and working smoothly with these rebuild kits. - 1096K: Contains one #1081 head as well as one #1075 plunger gasket for older PFP-2 and first generation PFP-4 floor pumps. Also compatible with second-generation PFP-4 floor pumps. - 1096X: Contains one #1096R head, one #1472 fitting, and one #1075 plunger gasket for second generation PFP-4 floor pumps. Also compatible with PFP-2 and first-generation PFP-4 floor pumps. - 1096Z: Contains one #1096R head, one #1472 fitting, and one #1087 plunger gasket for PFP-5 and PFP-7 floor pumps. Also compatible with PFP-3, PFP-6, and PFP-8 floor pumps.

Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.

They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.

Muc-Off Device Cleaner spray bottle contains an advanced pH balanced, eco-friendly cleaning formula that gives a streak-free finish for phones, tablets and laptops. It’s never been easier to keep your devices bacteria-free with the Muc-Off treatment. - Gives devices a streak-free finish - Formulated using deionized water and is pH neutral - Store in a cool dry place

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

Fact—tools make work easier. Free up that extra hand during tire stud installation with the Bontrager Tire Stud Tool, featuring a magnetized tip that securely holds the tire stud in place for a quick and easy installation. So grab a beverage of your choice, add some studs to your studdable tires, and ride through the winter's worst. Key features - Magnetized tip securely holds tire stud for easy installation - Use with Bontrager Tire Studs for installation on stud-ready tires

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

The great thing about wax-type lubes is that the shedding action of wax keeps parts cleaner during most riding conditions. Finish Line's Wax Lubricant is a unique formulation that features DuPont's Krytox, a highly advanced, thermally stable lubricant. Its specialized paraffin waxes set up dry and hard to repel grit and grime so your drivetrain runs silky-smooth and stays clean.

- Designed to clean your bike frame and components while caring for delicate finishes - Tough impact resistant dual density handle that won’t slip in extreme conditions - Oversized head for fast cleaning of large areas - Rubberized impact zones for maximum protection

- Zyklop socket with 3/8 inch drive and holding function - "Take it easy" Tool Finder with color coding according to size

Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.

Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

Regular lubrication of bicycle chains addresses annoying squeaks and noises, and extends the life of the chain and drivetrain components. Formulated using a proprietary blend of oils, Park Tool CL-1.2 Chain Lube works great in wet or dry conditions. It penetrates, reduces friction, prolongs component life, displaces moisture, and protects parts from rust and corrosion. Compatible with all bicycle chains. Also works great as general-purpose light lubricant for use on bicycle brake and derailleur cables and housing, spoke nipples, and derailleur and brake pivots. - 4 fl. oz. (118 mL) bottle NOTE: Some painted surfaces can be sensitive to oil and grease. Clean off any excess oil or grease immediately. Test first on an inconspicuous area to see if it causes a stain or discoloration.

A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 24mm wrench fits Shimano 15mm through-axle front hubs and many suspension-fork top caps. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park Cone Wrenches are made of durable tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Park's special Y-heads put more material where it's needed for excellent durability and strength. The 28mm size fits newer Shimano 20mm through-axles, as found on XT, XTR and Saint hubs. Most applications require at least 2 cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.

It's a spoon! It's a fork! Park's Stainless-Steel Spork is a take-along culinary multi-tool made from high-quality, rustproof stainless steel with a comfortable vinyl-coated handle. Who said nutrition has to come from energy bars? Pack your favorite eats and Park's Spork for enjoying on-the-ride snacks and mid-repair munchies in style! The Spork has a hole for carrying it on a keychain or hanging it on your workbench.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate.

• RockShox Dynamic Seal Grease (PTFE) • Recommended for rear shock service

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually

High-quality Kraftform Plus screwdriver. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Kraftform Plus: hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Hexagonal ball point screwdriver - Multi-component Kraftform handle for fast and ergonomic screwdriving - "Take-it-easy" tool finder: color coding according to profile and size - Hexagonal blade and ballpoint for secure working even in difficult installation situations - The Wera Black Point tip offers an exact fit and optimum corrosion protection

The majority of bicycle maintenance is precision work, and the Dual-Sided Pick takes things to a whole new level. Ideal for removing debris from tires and brake pads, mud and grit from pedals and cleats, grabbing cartridge bearing and suspension seals, or managing any number of other detail work procedures. The overmolded, file-tread grip provides excellent grip and excellent control. The in-line and angled arm shapes are complimentary for intricate work. Available separate, or found in our Team Edition Tool Kit. - Hardened CRV tool steel shafts resist bending under stress - In-line and 90-degree arm shapes combine to simplify countless precision applications - Overmolded ergonomic file tread grip prevents hand fatigue and promotes excellent control - Ideal for removing unwanted debris from bike accessories and components

- Biodegradable, non-toxic all-purpose cleaner - Fast-Acting cleaning agents lift away dirt while scrubbing grime and oil deposits - Specially engineered surfactants lower surface tension allowing better penetration and wetting of soils - Tough on dirt, yet gentle enough to use on delicate surfaces including paint, plastic, chrome, anodized finishes, rubber, carbon fiber, aluminum and magnesium - User friendly formula cleanly washes from the surface - Contains no harmful acids, CFC's or solvents.

Reaching the deepest and darkest parts of your drivetrain can be a challenge without the right tool. Boasting a mean, all-black finish, this is a great bit of equipment to clean the entire drivetrain. - High-quality nylon bristles - Molded silicon insets for a comfortable and steady grip - Paintbrush-like shape allows for easy application of cleaning product

• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

Rear Shock Air Valve Adapter (for charging IFP) - SIDLuxe A1+ (2020+)